Dream, Wish, Create a Beautiful World (by Anne)

This lovely image of a young girl (Victorian Photographs Rice Paper) really called to me and inspired me to make this piece. To me she portrayed a young girl that had experienced in her life far more than any child should.  Alone she would dream and wish for a better world. Her creativity would enable her to escape from the trauma and open the door to a world full of beauty.

I know that many can testify that using imagination and creativity really does take them to a happy place and can increase wellbeing. Sorry, maybe a bit heavy? I hope that you like the ‘beautiful world’ that I have created.

I first collected together lots of elements from my stash; a small wooden pallet (15cm square), a thick greyboard panel with frame (13.5cm X 5cm, 6cm X 2cm centre) plus smaller panel, silicone moulds to create flowers and fern, MDF Heart Keyplate, Penny Washer and Heart Flower (Powertex), scraps cotton fabric and lace.

I created the flowers and ferns using silicone moulds and Stone Art Clay. Stone Art was mixed approx. 50:50 with Ivory Powertex plus a little Transparent Powertex. Ivory Poweretex was also used to coat the inner greyboard pieces.

The wooden pallet and remaining greyboard and MDF pieces were coated with a leftovers mix of Powertex (mainly Lead and Ivory). I keep any leftover Powertex in recycled little takeaway sauce pots (plastic with fully airtight lids). My mix gave a lovely warm grey colour.

I spread Easy Structure Paste across the centre of the pallet and then spritzed with Green Bister.

The rice paper images were applied to the Ivory Powertex coated panels using Easy Coat Mat Medium. Note: the sentiment is actually snipped from the ‘Creative Paper’ branding down the side of the paper. I also used some small leftover snips from a floral paper.

Cotton fabric was treated with Ivory Powertex and draped diagonally across the middle. More texture was added using 3D Sand & Balls.

The flowers, ferns, Heart Flower and Penny Washer were coloured with Acrylic Inks; Palm Leaf, Viola, Viola Metallic and Golden Metallic. A little gold colour was also applied to the edges of the keyplate and image panels, plus drizzled onto the texture paste. The fabric was spritzed with a little Green Bister.

A strip of thin fabric braid was treated with Powertex, coiled tightly into a spiral, and added to the MDF flower centre (coloured with gold ink when dry). A sheet of Angelina fibre was created by ironing heat fusible sparkly fibres between sheets of baking parchment. I collected together a few snips of lace plus some Powercotton.

Next I put it all together. I hung a small metal ‘wish’ charm from the base.

I used Easy Structure Paste through the Duo Arty Quotes Mini  Stencil to add the ‘Dream’ sentiment.

More Acrylic Ink colour was dry brushed over textured areas.

I love the new Acrylic Inks. The fluid formula enables you to drizzle areas with intense colour too.

I was really pleased with my ‘Dream, Create, Wish’ mini artwork. I think that I might just have to keep this one for me.

Off to get busy as I have so many ideas. I will share more soon. Hugs all xxx.

Steampunk Jewellery Plier Stands (by Anne)

I have been meaning to decorate my jewellery plier stands for ages and finally got them finished.

I had a bit of a problem with these in that they started off as a plain varnished wood surface. I initially coated them with white Gesso with a view to painting them with acrylics. However, the Gesso did not bind well to the varnish layer – eek! All ideas were halted. These need to be fairly robust and a tonne of flaky chips after a short use was not what I wanted!

I then discovered Powertex and yay, I would be able to rescue and decorate my plier stands after all. Coating the entire surface with rice papers and torn kitchen towels would create a tough protective skin over the surface and prevent the feared chipping off of the base layers.

HOW IT WAS DONE

I first collected together lots of embellishments; die cut cogs and pipework (Sizzix dies), MDF Keyplate (Powertex), metal clock hand and chains, old light bulbs and screws.

I tore out images from Creative Rice Paper (Powertex). This particular sheet seems to be out of stock but there is a similar Victorian Steampunk Paper available. I also separated layers of kitchen paper and tore them into pieces to coat the surface. This would add texture and a protective layer.

STAGE ONE

First I applied the torn decorative papers using Easy Coat Mat Medium. Ivory Powertex was then painted on to blend in the image edges.

STAGE TWO

Next layers of kitchen paper were bonded all over the surface. Some were glued down with Ivory and some with Terracotta Powertex. Die cut card embellishments were also coated with Powertex and glued down.

Texture was added by applying Easy Structure Paste through a texture stencil.

I also had a try at the rust technique. I mixed some Rusty Powder into Ivory Powertex along with a few drops of white wine vinegar. This was painted and dribbled over the surface (extra powder sprinkled on top) and spritzed with water and vinegar before leaving overnight to develop. I spritzed at intervals, several times. I avoided the areas that will be in contact with my pliers. 

STAGE THREE

Next I brushed over and added colour using Acrylic Inks in Tangerine, Egg Yolk, Aqua and Metallic Gold.  

STAGE FOUR

I also applied a little gold Pebeo Gilding Wax on some areas. When fully dry and cured (I left them for 3 weeks) I coated the surface with Easy Varnish to fully seal and protect.

I have included lots of images of how all the surfaces were built up.  

Texture and die cut cogs have been added. 

Rust and colour added. 

Side finished with stronger thick greyboard embellishments. Any large embellishments protruding from edges need to be strong (thinner card would be prone to warp and bend).

I started with a larger clock image on the other side. 

Die cuts and texture added plus a metal clock hand for dimension. 

Finally finished with thicker embellishments and more dry brush work and gilding wax.

Love this character. 

Texture and layers built up. Waiting for the rust to develop. 

Building up the layers of transparent colour makes so much difference.

The second plier stand started off in the same way. 

At this stage you might feel like giving up. What a mess! 

Just keep going, adding layers of rust texture and colour. 

Just loving the gorgeous layers of texture and colour.

I used several layers of the die cut pipework together to make them thicker and stronger on this side.

Wooohooo – this is soooooo yummy (or is it just me – tee hee).

Another end panel. 

I used an MDF keyplate (Powertex) to embellish this end. 

The final colouring makes such a difference.

The final side had a couple of little storage wells. I won’t really be using these so a perfect place to embellish with larger items. 

I had fun adding recycled light bulbs, screws and bits of chain etc. I used structure paste and Powertex treated kitchen paper as a 3D glue to hold things in place. 

Initially I had added a thinner die cut cog to the end but it wasn’t really strong enough. Here I added another thick greyboard cog over the first. Much more practical. I also added a small MDF Butterfly.

Here you can see more of the Steampunk treasures added. I also added some 3D Sand and Balls. 

Love this Steampunk birdie peering out.

Well I hope that all these pictures have not overwhelmed you. I wanted to show how all the stages were built up. It also shows the stages that look awful, perhaps where a beginner might give up! Remember, if it all goes wrong just keep applying colour, inks or coloured varnishes. If this fails and you are really not happy – just paint over the whole thing with a base colour of Powertex and start again.

Hugs, Anne xxx.

Bister Mister Spray Tray

A crafter can never have too much storage and what is nicer than decorating your own?  I'm making quite a few bits at the moment in an effort to make my tiny weeny art space more colourful and more organised.  My latest piece is done with Powertex.

I made the kit up and then coated all over with Ivory Powertex.  I then added a texture paste, made up from Powetex and 3D flex. I roughly spread it over the two ends and in patches on the top of the storage caddy.  
On the longer sides I used Easy Structure to push through two of the artist quote stencils.  I then sprayed with blue bister and left to dry.
I also stencilled one side of the carry handle and on the other I roughly spread some of the 3D flex texture paste and pressed a plaster piece into it.
Once dry I washed back removing the surface bister and leaving a nicely stained base.  The bister had encouraged some great crackles on the ends and some nice fine ones on the top.
Next I used Acrylic inks from The Secret Art Loft to build up layers of colour and to bring out the crackles.

I used Aqua, Viola, Palm and Deep Sea which I applied randomly with a brush, wiping back with a wet wipe. This enabled me to build a colourful piece with a nice splodgy arty vibe.


Over the handle I added the colours and let them drip down, this gave a nice deep colour in the corners where the handle met the top of the tray.

Finally I mixed up some Bronze Colortricx with some Easy varnish and dry brushed the art quotes.

I also used some Secret Art Loft Blueberry Pie acrylic paint and dry brushed over the rough textures to add further depth.  

That's all for now

Fi xx