If unicorns could fly

So I was super excited when Tracey told me about the new animal shapes available from Powertex Uk. Especially when she said I could create a unicorn! I was so green with envy when I saw the beautiful unicorns created by everyone at the Powertex Garden Party (limited spaces are available to book for next year!Don't miss out it was an amazing weekend of relaxing, crafty fun!). I created mine with a little difference. Yes she can fly! The unicorn project pack has been put together by Tracey giving you all you need to create this. If you wish to add wings you will need wire in addition. 

Now I'd love to say I also did this bit but I was lucky enough to get a pre-made base from Tracey. As you can see from the photo you need to cover both sides of the mdf base with Powertex. Allow to dry, then use masking tape to adhere to the base.

 Then start wrapping foil around the base from the bottom up around the whole shape and use masking tape to keep in place.

 Paint Powertex over the masking tape to seal it and keep everything in place. We used Bronze.

You can choose to place the wings higher up if you wish. I used a really sharp pointed carving tool to make a hole through the tape, foil and mdf. You could use a bradle if you had one. Just make sure you watch your fingers! 

I then thredded some wire through the hole and crossed ti over the back of the body and taped in place. The wire was measured at just over 50cm, you could make them smaller or larger if you wish. Wrap the wire with masking tape and paint with Powertex. 

 From approx 1kg of Powertex and 250g Stone art tub I made up some clay. Then gradually added piece by piece. And stamped into the clay as I went. It's important to stamp the clay as you go because as it drys in the air it becomes harder to make an impression in.

I was lucky enough to have to hand an aray of these fabulous wooden block stamps. I love being at hq, I might move into our Traceys studio soon!

 I covered the whole body on both sides and stamped in different patterns.

I then tool my clay and pushed it into the daisy, pansy and rose moulds. It seems I didn't take a picture of the placement of these, but they ended up on the horses bottom. You can chose to place them anywhere.

I then coated a handful of Powercotton to create the texture on the mane and tail.

And dipped some paper dec in Powertex and covered the wire wings.

 I allowed everything to thoroughly dry and then dry brushed with some White Powertex. Just to allow the colours to come through brighter when I dry brushed them. But allowing the bronze Powertex to create the shadow for depth.

I used Burgundy powercolor into coral powercolor  on the mane.

 Rich gold colourtricx on the horn and the wings and flowers.

 I sprayed the body with brown bister to take the edge off the white. And added a mix of coral and white and layered up the colour on the body through dry brushing.

Turns out unicorns can fly! Hope you enjoyed this project. Of course if you feel as though you could use some guidance with this type of project just contact your local tutor through the directory to book on and have a go! It really makes a difference having an expert to hand. Toodles Anna xXx Follow me on my Instagram or Facebook if you like what I do. 

Don't forget to share your projects on Powertex Addicts United or The Powertex Studio on Facebook. Keep up to date with the latest at Powertex UK. 

Simple but effective

Hello, one and all. Me again, this time sharing with you a couple of easy, fun and elegant projects.

The first piece I want to share with you is the seahorse project pack.

Please excuse my  Powertex covered workspace.

( I really need to clean this )

I opened the pack and looked at all the yummy stash in the pack.

Keeping this project simple was the key and I only used some cardboard and a piece of lace, which was from an old top from my Daughter.

I firstly glued to the two pieces of seahorse together with ivory Powertex both sides and dried it using my faithful old hairdryer.

I then soaked a piece of lace in the ivory Powertex and laid it down on my seahorse and again dried it with my hairdryer, to speed up the process, as I was eager to move on.

I found some different lace and thought it would make a good fin shape. I also added the same lace to the top part of the seahorse, after adding some cardboard, as this was my original thought process but decided that the lace effect looked way better.

Now for the best part, the colour transformation. I chose my  POWERCOLOUR and my general idea was to try an do an "ombre" effect but as you will see, sometimes the Powertex has other ideas!

BUT that is the beauty of this product, you can paint it whatever colour you like and if you get bored of it or it does not go with your colour scheme, then you can just change it! 

(I really, really, must clean my workspace) 

I added the yummy bits from the project pack and again glued with Powertex and decided to highlight in the RICH GOLD pigment and also WHITE the two colours of which I do love to highlight.

I titivated a bit more with pigments and varnish until I was happy with how she looked.

So here she is, all done and using just the project pack and a little bit of lace.

I think she turned out rather well myself.

Oh, and I added a small black bead on the eye area. A brilliant project if you are new to Powertex and not much other materials used to create this (I think ) beautiful Seahorse.

Thank you for reading and I hope I have inspired you to get some Powertex and give it a whirl, you won't be disappointed.

Till next time 

Jinny 

POWERTEX.CO.UK

Love using Powertex

So my first official post of the year. Happy new year everyone.

To create this piece I had a large paper mache heart I have had hanging about in my shed. I have recently been playing with glue gun texture, so decided to try this out on a larger piece. 

I painted the heart with yummy red Powertex and found some old tablecloth, which is the cross texture, you can see, I then used my new glue gun that Santa brought me and drizzled hot glue randomly around the heart shape. 

I had a good old rummage in my stash of metal embellishments and added using the red Powertex as my adhesive, I then added the Love MDF piece and set about bringing this heart to life.

I next sprayed some black Bister over the embellishments to add depth and shadow to my piece.

Next, I did some dry brushing with my favourite Colortricx Rich Gold, to add highlights and make this little beauty pop and pop she did!

I added a gold-tone large hook so it can be hung up.

The photo below is a close up of the glue gun texture, it works so well with Powertex. 

I have added some gloss varnish on the MDF heart to give extra pizzaz. Hope I've left you inspired I had a ton of fun creating this piece. Ta ta Jinny x

We'll meet again....

Well, what an amazing response we had from you all at the Birmingham NEC hobbycrafts show. It was so wonderful to share with everyone our love for Powertex!

The team at Powertex Uk hq worked like busy bees and did a grand job of filling packets, labeling, punching, stapling, organising and packing stock in between the normal day jobs. 

Tracey and Garry out did themselves again!! They had a long Wednesday set up, with a 7 am start and they didn't return home to 6.30 pm. But they certainly brought the blank canvas that was the stand to life. With a beautiful array of new products, samples and jaw dropping, stunning artwork.

The creative team were a buzz with excitement. It's so lovely for the tutors to get an opportunity to get together and put a face to the name you often speak with on social media. And gives them all the experience of a big show and to share there knowledge and passion too! 

We managed to catch up with some old faces and some brand new ones who had never seen Powertex before.

We had a good lark about with our neighbours, whom included the crew at Hochanda, Craig at Marbling 4 fun and the team at Totally beads to name but a few. Convinced some of them to go pink for Powertex pink sunday. And raised a bit of money for Cancer Research in the process.  Who says you can't have a bit of fun on the last day!

We crashed out yesterday and had an easy one. Traceys feet were broken, don't worry not literally, Garry had overdosed on sweeties and my ribs were aching from all the laughter. We always have a good crack at the shows and I think that's apparent from the atmosphere on the Powertex UK stand. 

We hope you all enjoyed yourselves. We definitely did! Until next time, we'll meet again. That's all folks. Toodles Anna xXx 

Jack, Sarah, Powerwax and an important question!

Hello again

Well I bet you were wondering what has been happening with Jack and Sarah?

They took 6 weeks leave in Summer and Jack took her on her own Grand European Tour.  They kissed on the Rialto bridge, climbed every mountain in Austria (!), visited Aphrodite's rock and ended their tour at Monets garden in Giverney France.  Here inspired by the surroundings, Jack knew he had found his true soul mate and so just had to ask the question..........

He chose a MDF box which had been altered using Powertex Ivory and 3D Flex with bister.

Moulded fish and lily pads had been added and coloured with bister also.  

The whole box inside and out was then shaded using the new Powerwax to give beautiful depth and shading.

But what was the question?

And what will be her answer?

Until next time have fun in all your creative adventures

Ax