Northern Lights

Well here we are Autumn is almost over the dark nights are with us.  I love crisp cold dark nights when I can see lots of stars twinkling in the sky after the stunning colours of the setting sun.  Here in the UK there a only a handful of places where, if the conditions are right you might spot the Northern Lights. Going to Norway or Iceland to see the Northern Lights is high on my bucket list but until then, I have created my own abstract Powertex painting to stir or feed that dream!

So grab a coffee and relax while I take you through some very simple steps to create your own version.

First I took a canvas that had been part used on a demonstration and it already had some texture at the bottom.  I had created the texture using a mix of Easy Structure and Powertex sand balls which I put down on a white 30x30 cm canvas.  

I then made up some Easy 3D Flex with some white powertex and using a metal artist pallet knife I spread the 3D Flex mixture vertically on my canvas. As the base texture was already dry, I painted over a good coat of White Powertex.

Next I mixed up some blue bister granules using a teaspoon of granules to 30 mls of warm water from the kettle with 30mls of white vinegar.  This gives a crisper look when sprayed on your canvas as can be seen in the image below.  I also sprayed some standard black bister at the top area of the sky section

To give more depth I sprinkled some blue bister granules onto the area representing water and rocks and sprayed this with water.  

I then left the whole thing to dry and crack over two or three days.

Once it was dry I washed back the black area of bister using a damp sponge. I then used a mix of the Aqua blue and Deep Sea Secret Art Loft acrylic inks to create the dark water and sky. I then used Secret Art Loft acrylic paints in Key Lime, Blueberry Pie and Plumb Pudding on a very dry brush to create the colours synonymous with the Northern Lights.

I then added some metallic highlights using Golden Metallic and Viola Metallic inks as well as Green Ginger, Limoncello Gold and Colortricx Pearl pigments mixed with Powertex Easy Varnish.

I can't tell you exactly how I added the pigments and colours as I use loads and loads of very light layers, just experiement and have fun!

Here is the finished piece

See you in December where I have created a Powertex Christmas Ornament!

Bye for now

Fi

Nothing to Fear (by Anne)

Hi all, today I am sharing one of my projects created during the Powertex Garden Party in July. It was an amazing weekend and I went along with my ex’s lovely daughter Marie. Living far apart we rarely get the chance to be together – so it was extra special to have a whole weekend crafting together.

Others also came along with friends or family but many came along on their own. Some were familiar with Powertex and some, like Marie, were completely new to the medium. Whether experienced or not, travelling with friends or alone, the Team at Powertex were wonderfully inviting and everyone soon felt relaxed and eager to get started. Tracey gave us all fabulous instructions to help us along the way. It was a wonderfully relaxed weekend and we made many new friends.

The huge display of different projects from the Powertex Team on display around the gardens was simply amazing.

I completed most of this canvas project during the weekend but you know me – I just had to add a more embellishments and bling when I got home. We had great fun creating layers of texture and colour.

We first painted our 12 X 12 inch canvas with Black Powertex onto which we then built additional layers. We applied background texture layers with Powertex treated recycled corrugate card and mesh canvas. We then created a ‘dirty mix’ using Black Powertex, Stone Art, 3D Sand and Balls and applied to the canvas, adding more texture by pushing in mark making tools etc.

The Team then provided us with a ready made mix of Easy 3D Flex and  Ivory Powertex. This medium provides a gorgeous crackle texture on drying.

We were also provided with a small MDF frame and choice of small plaster embellishment. I chose to use a skull. We were helped and advised along the way on the easiest layout of different textures and elements for a successful arrangement.

I added more texture to my frame with Easy 3D Flex and small Sand and Balls. You can see the marvellous cracks that develop – yummy. We then chose from a range of Secret Art Loft Acrylic Ink and Paints for colouring. I chose a mix of turquoise, pinks and yellows (Acrylic Paints – Raspberry Sorbet, Lemon Meringue, Blueberry Pie; Acrylic Inks – Raspberry, Metallic Aqua and Aqua). These paints and inks are gorgeous and allow you to build up lots of layers of transparent colour. I used Colortricx Silver in Easy Varnish for some of the dry brushing to enhance textures.

On getting home I added more embellishments to my canvas – die cut birds, clock, circles and rings (cut from recycled thick card). I also used the Daisies Silicone Mould to make flowers and leaves from Powertex Clay (made with Ivory Powertex and Stone Art). The embellishments were painted with Black Powertex before sticking down. I also used some Easy Structure Paste tinted with a bit of Black Powertex as a 3D ‘glue’ to stick down elements on uneven highly textured areas.

I used some stamps from my stash to create the sentiments (using Versamark Onyx Black Ink) and used Easycoat Matt to stick them down and seal.

I finished with more layers of pigment and varnish, applying with a dry brush to highlight textures. I adore the new range of pigments from the Secret Art Loft (colours used – Interference Blue, Blue Curacao, Interference Violet and Green Ginger). I finally added some gold and silver gilding waxes applied with a finger (I just cannot help myself from adding more bling).

Here is Marie’s amazing canvas. I love the colours, textures and hidden surprise elements.

We all had so much fun and between us created an amazing array of individual and very different takes on this theme.

Bye for now, Anne x.

Floral Trinket Box created (by Anne)

I have had a wire box frame in my stash for ages. Originally it had a woven straw covering that fell apart so I removed it with the intention of recovering it. It ended up as another ‘UFO’ (unfinished object) for years. I have finally dug it out and created this Powertex treated fabric box embellished with hand made fabric flowers. Now it’s a fabulous trinket box for storing some of my crafty treasures.

The bare wire frame is a strong construction – similar to the type of wire used to make coat hangers. It measures approx. 8 inches square across the top and 6 inches deep.

I used some recycled cotton bed sheets and treated them with Black Powertex to cover the box and lid. I lined the outer and inner panels to completely cover the wire frame. I gathered some cotton trims for the next stage; some crochet lace and a piece of gathered Broderie Anglaise.

I treated the crochet lace with Powertex and applied around the box base.

The gathered lace was applied around the lid. I also dug out some greyboard lazer cut foliage shapes to embellish the top. These were coated and stuck down with Powertex. When dry I started dry brushing over the surface using Easy Varnish and Silver Colotricx. Extra colour was applied to the foliage to make it stand out from the dry brushed background.

Here you can see the dry brushed lid next to the unpainted base. The dry brushing has emphasised the texture and added metallic highlights.

Next I made some fabric roses from 25mm and 15mm strips cut from recycled bedding. These were created using Ribbon Ruching Flower Combs from Gina B-Silkworks. Basically strips are marked out using the Flower Comb templates, a running stitch is sewn along the marked lines and the stitching is pulled up to gather and shape into a rose. I prepared my strips and treated with Powertex before pulling up the stitching. The Powertex holds and glues the gathering in place. I left the flowers to dry before adding to the box top.

I used one of my dies to cut a frame for the centre (Sizzix), applied to the top and finished in the same way as the greyboard foliage.

The flowers were dry brushed with Easy Varnish and Interference Lilac Pigment. Loving these new Pearl Pigment colours! Powertex was then used to glue down the roses to the centre. I added some ready made flower stamens around the group (purple), and some small ready made satin ribbon roses to the corners (Powertex treated and coloured).

Next I mixed some 3D Sand and Balls into Black Powertex and drizzled the mix around the flowers. A few untreated balls were also dropped into the wet Powertex. The untreated balls kept their original colour on the surface giving contrast with the black base. Once dry I coloured by brushing over the surface using Easy Varnish and Mojito Lime Pigment.

I also dry brushed a little of the Lilac pigment sparingly over the lace trims and used to colour some hand made air dry clay embellishments (created using a silicone mould from my stash) added to the box corners.

I used one of my large rubber stamps (lace design from Heartfelt Creations) to stamp some extra textural interest around the sides using Viola Metallic Acrylic Ink. Note: the fabric surface is already quite textured and not very flat so the stamping does not give a clear impression of the design but just adds a little more depth and interest to the surface.

I hope that you like my new treasure box.

Hugs, Anne xxx.

Alice in Wonderland Clock created (by Anne)

I have had so much fun joining the Alice in Wonderland Tea Party with Powertex UK. I love fantasy themes and wanted to make a working clock full of bright fun colours and sparkle. Hope that you like my Alice Clock. It certainly fills me with cheer and makes me smile.

I had an old heart shaped MDF working clock that really needed a revamp. I combined it with the Pocket Watch Kit to create my crazy clock. The kit contains a stand, solid back and frame to make up a 3D pocket watch. Also included are lots of smaller embellishments for decoration – great kit.

The stand was put together using Black Powertex to coat and glue everything together.

The open watch frame was coated with Black Powertex.

The back and outer rim of the solid pocket watch shape were also coated with Black Powertex. The central area was painted with Ivory Powertex ready for adding images. When dry, pocket watch images from a decorative Rice Paper were applied using Easy Coat Mat decoupage medium. The sheet I used does not appear to be in stock at the moment but the Victorian Steampunk sheet is similar. The surface was spritzed with a little Green Bister to knock back the harshness of the Ivory colour. 

I coated my recycled MDF clock with Ivory Powertex on the front, Black on the back. Again Easy Coat was used to add Rice Paper images. You can still see the original painted numbers on my old clock face.

A layer of Crackle Accents (Ranger) was added onto the clock face images to give an aged crackle effect. When dry, more Green Bister was added to emphasise the crackle (the wet colour seeps into the cracks). Texture was then applied using Easy Structure Paste through the Wonderland Stencil. I dabbed over with a little black Powertex to cover some of the bright white colour. Easy Structure Paste was also used as a strong 3D glue to attach the watch to the stand.

Rice paper images were also applied to my recycled heart clock. Layers of kitchen paper were applied around the decoupaged images using ivory Powertex to give added texture. I also added Easy Structure Paste through the stencil to add hearts.

Several of the new Acrylic Inks and Paints were used to add colour to my project (Acrylic Inks in Egg Yolk, Tangerine, Golden Metallic, Viola Metallic and Aqua Metallic; Acrylic Paints in Raspberry Sorbet, Orange Marmalade and Key Lime). The inks are gorgeous fluid transparent colours ideal for painting over other colours or patterned papers. The medium bodied acrylic colours are semi-translucent and are great for heavier colour and layering. I LOVE them.

A piece of tree bark was treated with Transparent Powertex. I have had this piece in my stash for years (so it was fully dried out) just waiting for a suitable project to use it on.

The pocket watch frame was glued in place with Transparent Powertex ensuring that it was well centred. Easy Structure paste was used to glue 3D elements onto the base stand. Bronze Powertex was used to cover and colour the Easy Structure Paste where needed. At this stage I checked that the clock hands would be able to move freely around the clock face (once it’s all glued and dry it’s well and truly glued!).

The small MDF heart (from my recycled clock) was treated with black Powertex. I added some 3D Sand and Balls into the wet Powertex for texture. When dry I coloured with Easy Varnish and Interference Lilac Pearl Pigment. Have you seen these new Pearl Pigment colours? WOWeeee!  I rubbed over a little Pebeo Gilding Wax (gold) to cover the edges and highlight the texture more.

Gilding Wax was also rubbed over the Pocket Watch tops and tree bark. A thick greyboard frame and rectangle was coated in Black Powertex to create a table. A piece of lace and scrap of knitted cotton was also coated in Black Powertex to fill in the base of the ‘tree’ and to create the table cloth. I started placing other MDF elements from the Pocket Watch Kit (but not glued down yet).

More colour was added with the Acrylic Paints. The metal clock hands were coated with Jade Patina (Ranger).

….. and yes my craft stash is encroaching inwards – tee hee.

I continued to build the scene, coating elements with Black or Ivory Powertex then colouring with Acrylic Paints before gluing down with Powertex.  

The MDF sentiments and Flamingoes were from the Alice Collection; the butterflies, dragonfly, numbers and spirals from the Pocket Watch Kit. The sentiment plaque was a greyboard piece from my stash. I added some 3D Sand and Balls to the Flamingo wings for extra texture.

A layer of Glossy Accents (Ranger) was applied over some of the painted elements and fine crystal glitter dropped into the wet surface for added bling and sparkle. The piece was then left overnight, propping it in a horizontal position.

I also added an MDF Heart Flower, Lion, cat and small bird from Mini Hieroglyphs, MDF flowers and leaves plus greyboard flowers (from my stash). The little signposts were made from recycled wooden canvas stretchers and black alcohol marker used to write.

Then I had fun with my dies. Each element was built up using 4 layers of either black or Kraft card and layers glued together with Powertex to make them thick and robust. Coffee Archival Ink (Ranger) was used to stamp the chairs (Sizzix). The cake stand, cupcakes, small cup & saucer, spoon & fork and teapot cut (Intricutz); the larger cup & saucer and top hat (Sheena Douglass); the chandelier (Crafters Companion) were built and glued in place with Easy Structure paste where needed to give added depth. More Glossy Accents and glitter were added over some of the elements.

Finally a little dry brushed colour was added over some of the textured surfaces using Easy Varnish and the Pigment colours (Iridescent Lilac, Violet Valentine, Rich Gold).

I will leave it for around three weeks for everything to fully cure, then finish with Easy Varnish to fully seal everything and give added protection to painted surfaces.

I’ve popped in some close ups for you. Ooooh sparkly flamingos.

I am always running late so this sentiment is perfect for my clock – tee hee.

You can see that crackle texture on the watch faces here.

Lots of layering and sparkle.

I absolutely love my new clock. I hope that you love it too, Anne xxx.