Remember, Remember, the 5th of November...

Remember, Remember, the 5th of November. Gunpowder, Treason and Plot!

I love this time of year as the autumn moves towards cosy winter nights. Halloween has passed and bonfire night awaits before the count down to Christmas. And a cup of hot soup in front of a big bonfire takes me straight back to my childhood and my childhood bonfire nights wouldn't be complete without a Catherine Wheel - the inspiration for this project.

I started with a 20cm square canvas and painted it with black Powertex. I then used Easy Structure to stencil a swirl design onto the canvas and once dry painted over this with black Powertex. 

Although very little of this pattern would be visible on the final pieces it also provided me with a basic shape to follow when adding the paperdecoration.

First I used small pieces of white paperdecoration which I laid slightly randomly but following the swirl pattern and painted over it with black Powertex. (You could use any colour paperdecoration for this part as it is completely covered with the black)

Once this was dry, I mixed rich gold colortricx pigment with Powerwax and gently applied it over the raised parts with a sponge.

To add some extra depth and texture to the corners of the canvas, I mixed some red Powertex with Easy 3D Flex to make a paste and applied this roughly to the corners and left it overnight to crack. 

I then carefully painted the top surface of the cracked area with black Powertex. Using the red Powertex with the Easy 3D Flex made sure that there would be nice bright red colour in the cracks.

Next, it was time to add the gorgeous coloured paperdecoration - burgundy, light pink, red wine and red.

I tore off long thin pieces of paperdecoration and fanned it out towards the end. I laid these onto the canvas following the swirl pattern and painted over them with a good coating of transparent Powertex. Although this goes on a milky white, it dries clear allowing the original colours of the paper dec to show through.

Once I had added enough paperdecoration I left it to dry overnight.

The final part was to add some gold and copper tones to give it the warmth of fire. I did this by mixing colortricx pigments (copper, bronze gold and rich gold) with Powerwax and applying it over the tops of the texture with a sponge.

I am still undecided if I need to add anything into the centre. I am keeping my eyes open for a nice bit of fiery bling...

Until next time, Abs xx

Tremendous Textures by Abigail Lagden

One of the things that drew me to Powertex was the amazing textures and depth that can be created. I now look at everything for its texture potential and powertexability. So this month I thought I would share with you just a few of my favourite textures that I have encountered over the years that I've been creating with Powertex.

T-shirt Yarn

I have to start with t-shirt yarn. Made from the off cuts from the textile industry, not only is it a great use of otherwise waste material, it was t-shirt yarn that first led me to Powertex. Originally, I was using it to crochet chunky bags and doorstops and wanted to make a plant pot that could go outside... so on the hunt to find something that would harden it and make it weather resistant, I discovered Powertex. (and then I discovered all the other amazing stuff you could do with Powertex, and the rest is history!!)

You can pick up t-shirt yarn from the Powertex website.

Embossed Wallpaper

If you've seen my previous work and blogs, or been on one of my workshops then you will have seen wallpaper crop up here and there. Perfect for creating background textures quickly and easily, it is also available in such a huge range of patterns to suit any style or project. This is definitely one of my go-to's.

I used a tree bark effect paper on the roof of my fairy house.

Stockinette Polishing Cloth

I am told this stripy cloth is for polishing cars, but it is even better Powertexed. Whilst the colours get lost under the darker Powertex, each stripe is actually a different knitted stitch and so the stripes are still visible as texture. I have used it for the cloak on this little hare.

My 'hideous fabric'

I have always jokingly called this fabric my 'hideous fabric'. I really don't like flesh coloured fabrics and the elasticated embroidered pattern on this would make it a nightmare to try and make anything from. But the texture created by the stitching is absolutely gorgeous.

I found it reduced in a fabric department (probably because no-one normal would want it) and I bought all that they had left. Sadly I haven' t been able to find anything even similar since and I am reaching the last of my stash!

Halloween decorations

This time of year is great for finding interesting spooky decorations that can be incorporated into projects. My favourite discovery this year is this fabulous netting from Wilkos (thank you fellow tutor Lin Shields for sharing her find with the rest of us).  Looks great on this bottle wrap created by Lesley in my workshop the other day.

Web fabric

Made from jute, this florists fabric creates beautiful effects, particularly as an interesting background texture. I love the irregularity of it.

Well, that's enough from me, now get out there texture hunting...

Until next time, Abs xx

Curiously Contrary

Let's Get Organised by Abigail Lagden

It's been a magical summer for me running many workshops for children (and adults) during the holidays. I've helped budding wizards create over 100 wands and 50 spell books!

But now, as they all head back to school, I felt it was time to treat myself to some special storage for my everyday essentials. And this fantastic MDF storage caddy by Candy Box Crafts fits the bill perfectly.

As it comes flat packed, I started by trying to work out how all the pieces fit together to make the organiser and I have to say it was quite a bit easier than I expected.

Once I knew where all the pieces were going I used bronze Powertex to glue them together by painting a very thin layer on the joining surfaces and fitting them all together (I also painted all of the inside surfaces with bronze Powertex as I wanted a dark interior). 

Top tip - I used elastic bands around the outside of the organiser to hold all of the pieces tightly together whilst the Powertex dried.

I confess, with this project I didn't really know where I was going with the decoration at the start, I just knew that I wanted it not to be too bulky so that it would fit onto my already jam packed work surface. So I started by using Easy Structure paste through stencils to add an embossed pattern to all four sides - as well as some other stencils from my stash, I used the fabulous Fossilized and Wonderland stencils by the Secret Art Loft.

The structure paste was allowed to dry before all four sides were painted with Lead Powertex and small 3D Balls sprinkled into the wet Powertex.

I then mixed a paste using Lead Powertex and Easy 3D Flex which a spread over some of the blanker areas of the sides using a palette knife and pushed some pieces of a jigsaw puzzle into the paste on the front. This was left overnight to allow the paste to dry and crack.

I then used Powerwax mixed with Powercolor pigments to apply layers of colour using a sponge. I used the following pigment colours - turquoise, green, white, blue, burgundy and lilac. And finally dry brushed using Rich Gold Colortricx mixed with Easy Varnish.

To brighten up the centre piece I decoupaged it using EasyCoat Mat and pieces of this gorgeous rice paper.

Once it had all dried it was time to put it to use. Apologies for the state of my bottles and brushes but was made to be a working storage caddy so it would have been unbelievable for everything to be brand new and spotless. Two 1kg Powertex bottles fit into their compartments perfectly and then there is still plenty of space left for brushes, and your other crafty essentials.

Hope you have enjoyed this month's project and have been inspired to get organised. 

You can see more of my work, my workshops and my antics on my Curiously Contrary facebook page and website.

Until next time, Abs xx

Rainbo the Elephant by Abigail Lagden

An exciting design team pack arrived this month. Imagine my surprise to open it up and find an elephant inside!!

I love all the animal MDF templates by Powertex UK. But these new ones are a bit more exciting. They have been cunningly designed to fit across the pins of the large 2 pin metal stand which means you have the option to make a 3D, free-standing sculpture.

Now, you may have seen that we had the annual Powertex Tutor Retreat in July which was follow by a fabulous Abyssimo workshop run by Maria Fondler-Grossbaum. All of the projects we completed over the three days were all very different and all well away from my comfort zone. But I adore learning new techniques and mingling with other lovely creatives, so it was the most wonderful weekend. Anyway, here are my three completed projects...

Rosie Casselden's Fish Workshop

Abyssimo Workshop

Tracey Evans' Workshop

What I took away from the weekend was a need to do something bright and funky with my elephant project as well as (among other things) the three new, scrummy acrylic paints from The Secret Art Loft. I was also inspired by all the gorgeous unicorns created at the Secret Garden Party.

For this project you will need:

• MDF Elephant Template
• Large 2 Pin Metal Base
• Armature wire 1-2mm
• Masking Tape
• Tin Foil
• White Universal Medium
• Stone Art
• Stamps/shapes to impress
• Daisy Flower Mould
• White Paper Decoration
• Secret Art Loft acrylic paints - Plum Pudding, Blueberry Pie, Mint Jelly, Key Lime Pie, Lemon Meringue, Marmalade, Red Velvet
• Colortricx Clear Gold Pigment
• Easy Varnish

And here is what I did...

First I covered the base in cling film so it wouldn't get covered in mess!

Then I attached the MDF elephant to the large 2 pin metal base using masking tape. I used some 1mm armature wire to form the shape of the ears, which was fed through the two holes in the template and secured in place using masking tape.

  

I then built the elephant out using tin foil and masking tape, so it was no longer just a flat piece of MDF. All of the foil was covered using masking tape before being coated with a layer of white Powertex universal medium.

I mixed some stone art clay using white Powertex and StoneArt. I used about four fist sized balls of stone art clay for the whole thing. I prefer to leave my stone art clay overnight before using as I find it easier to work with after is has rested for a bit.

Taking small pieces at a time, I covered the elephant with the stone art clay and used a clear stamp and a wooden printing block to impress flowers and patterns into the clay.

I used the remaining clay to mould some daisies using the Powertex Daisy Mould and attached these with a little white Powertex.

For the ears I used white Paper Decoration to get a texture rich wrinkly surface.

I added some fish net fabric over the elephant's back and some flowers on the trunk but changed my mind at the colouring stage and removed them.

The project was left to dry. Where I have added stone art clay embellishments, I find it is a good idea to let project dry before colouring as the clay shapes can shrink a little and expose some of the white surface underneath them.

Once dry I used the Secret Art Loft acrylic paints to transform the elephant into a rainbow (Is this getting a bit predictable now?). I applied the paints using a mixture of a brush, a sponge and my fingers!

The paint was left to dry before using white Powertex to dry brush the surface to enhance the appearance of the textures, followed by clear gold colortricx mixed with easy varnish.

And, after my Abyssimo workshop, I couldn't resist adding a little bit of bling too!

I hope you like my rainbow bright elephant and will be inspired to get creating with Powertex.

Please feel free to have a look at what I am up to on my Curiously Contrary facebook page and website.

Until next time, Abs xx