A Window on Jurassic

A Window into Jurassic

One of our many "favourite" locations on the English South Coast is the cliffs along Burton Brandstock and eastward to Lyme Regis.  I love the contrast between the types of rock and their the colours and the little secrets of the past they reveal.  I remember one of our visits to Burton Bradstock not long after a cliff fall.  I was in awe of the rock formation, the layering and the little windows the fall had opened up in to the past.  

So with that in mind and having also loved working with Tracey Evans on our Jurassic themed shows on HOCHANDA TV where my focus was on Powertex jewellery, I decided to create a piece of wall art using the Stencils and Ammonite Moulds and remembering that fabulous holiday and location.  

Before starting with the frame, I got out my Powertex Ammonite Moulds (they come in three sizes) and mixed various colours of powertex with 3D sand to make a collection of ammonites.

For this piece I used Powertex Yellow fabric hardener to paint over the frame which was from my own stash, we all have stashes don't we? 

I then added some 3D sand and more yellow Powertex to make a fairly stiff paste.

Using a palette knife I spread the paste onto the painted frame in a vague linear pattern until the whole frame was covered.  I then painted some more yellow Powertex loosely into the linear grooves and dropped on some 3D small balls for added texture.

Next I mixed more sand into yellow Powertex to make a fairly sloppy mix, rather like wet plaster.   I poured this into the cavity and then arranged my pre-prepared powertex ammonites.  

Some I laid flat and others i places a varying angles, as they may have done naturally.  I dropped in some more of the 3D small balls.

I then took some Powertex Easy Structure - boy I love the texture of this stuff!!!

I used the three sizes of ammonite stencils from Powertex Jurassic Stencil.

I laid large one in one corner and carefully pressed through the East Structure.  Then in the opposite diaganal corner I did the same but using the small and medium stencils.

Next I used some Green Bister (mixed into a fluid with water) and sprayed across diagonally to add some weathering as seen in the image to the right.  I also added a few squirts of Red Bister.

As well as spraying evenly, I did a few short squirts to leave some blobs of bister randomly.  I felt this added to the natural weathering and formation of my cliff seen.  

I then left the piece to dry naturally overnight.

Once the piece was dry, I dry brushed over the non stenciled corners with a little more yellow Powertex that I had slightly lightened with Ivory Powertex, to give the impression of a shaft of sunlight passing over the shadows of the cliff as it revealed it's secrets.

Finally I used Powercolor Red Ochre, Colortrix Bronze Gold and Colortrix Power Pearl Red  Pigments with Easy Varnish to bring out the highlights and features.

I hope, if you got the ammonite moulds and the jurassic stencil from our Hochanda shows, that you have had fun using them and that maybe this project will inspire you to create some more.  

Don't forget to share them with us on our Powertex Addicts Facebook page! We love to see what you create!

Bye for now...

Fi